At glassbeveragedispenser.com, we offer many different types of spigots for your beverage dispenser. Each spigot offers a different look for your beverage dispenser and characteristics. Some spigot types will dispense your vodka faster than others. This page contains information* about the flow rates of our different spigots for your glass beverage dispenser. The types of spigots used are:

• Small Spigot- This spigot is standard on our Venice, Siena, and Palermo beverage dispensers. No spigot upgrades are available, and these spigots are not transferable to our other beverage dispensers.
• Classic Spigot- This is the standard spigot available on our beverage dispensers except for the above. Available in Brass or Chrome.
• Curved Neck Spigot- This is an upgraded spigot available for most of our beverage dispensers. Offers an elegant design and increased spigot flow. Available in Brass or Chrome.
• Plastic Spigot- This spigot upgrade has the fastest flow and is recommended for commercial use. Available in Black, White, and Blue. (Not available on all beverage dispensers.)

Below is a table showing the time each spigot will approximately take to fill an one ounce shot glass and a four ounce glass, respectively:

*Please note information provided herein is for informational purposes only. Web Infusions makes no warranties regarding spigot performance. The tests performed are dependent upon many variables that may affect outcome. Actual results may vary.

Testing Methodology: All tests were performed with the Milano beverage dispenser without the lid fastened using water. Time was measured by time to fill a 1oz jigger and 4oz measuring cup with each of the different spigots. Each test was performed 5 times and an average was used for the final result. Rate calculation was taken from the 4oz test and converted into metric.